Gear Finder Calculator


Enter the pinion size (in number of teeth), spur size (in number of teeth), tire size (in decimal inch value, ie for 2 1/2", enter 2.5), and your motor/engine's rated loaded RPM (no commas) and then click "Calculate".  

The Gear Ratio, Inches Per Revolution (IPR), Feet Per Second (FPR) and Miles Per Hour (MPH) will be calculated for you!


Fill Out This Side Only

Results

Pinion Size: Gear Ratio: 
Spur Size: Inches Per Revolution: 
Tire Size: FPS: 
Loaded RPM: MPH: 

 

Original Concept and Base Code provided by Randall Smith (c), 1999

 

NitroRC.com

NitroRC.com, 1998, 2011
All Rights Reserved
Duplication Prohibited Without Specific Written Permission
Click here for legal use information

This page last modified: 07/26/11